fahrradständer adapter 40mm Kickstand Adapter

fahrradständer adapter 40mm Kickstand AdapterThis kit is intended for Midwest Mini Mods swingarms. Although, it can potentially be used on any 40mm kickstand mount with the use of varying length bolts depending on your application. This will allow the use of standard kickstands with rear mounted spring. Install using the included stainless hardware by placing the nuts into the slots on the front of the adapter and feeding the bolts through the swingarm into the back of the adapter. Please

This kit is intended for Midwest Mini Mods swingarms. Although, it can potentially be used on any 40mm kickstand mount with the use of varying length bolts depending on your application.

This will allow the use of standard kickstands with rear mounted spring.

Install using the included stainless hardware by placing the nuts into the slots on the front of the adapter and feeding the bolts through the swingarm into the back of the adapter. Please install using hand tools to avoid galling.

Compliment it with my custom kickstand, available here. Otherwise, here are a few stands of varying lengths that people used. 

* 7.5 - 9.5 OR 10.25 - 11.75 inches Basic CNC kickstand. Be sure to choose the "lengthened" option if you need 10.25 - 11.75

Some stands include bolts with 12mm shoulders like the Mototec above. I just swap to a standard M10 bolt. Otherwise, my adapter can easily be drilled out to accept the larger shoulder using a 13mm or 33/64in bit.